Hypertech Subaru WRX (09-11) Max Energy Sport Power Programmer
Product Code: 62007
- Usually Ships 5 to 9 Working Days
- 4 months at 0% interest with PayPal (orders £99+)
- 0% interest finance on this product with Omni Capital
Deposit amount must be greater than or equal to .
Higher compression ratio engines and engines with superchargers or turbo chargers were designed to use only premium octane, so only one (1) Power Tuning program for premium octane is provided. But, if your car or truck came from the factory capable of using more economical regular octane, then two (2) optimized tuning programs are provided: one for premium, and the other for regular. In most cases, Hypertechs exclusive Power Tuning for regular octane provides excellent power gains, almost as much power as premium octane. If you are using premium octane, and you want all-out, maximum power, then select premium octane Power Tuning. manufacturers limit a vehicles top-speed to match the speed rating of the factory-installed tires. If you have installed tires that have a different speed rating, the Max Energy allows you to raise or lower the vehicles top-speed limiter to match the speed rating of the newly installed tires. A tires speed rating for maximum safe speed under perfect conditions is marked on its sidewall. Always obey all traffic laws when driving and only use this feature for off-highway competition in sanctioned events. The selectable throttle restriction tunes the engine control systems for better low speed performance without sacrificing driveability, but it does not disable the torque management completely. There are many different torque management systems active at any given time while driving. During our tuning development we altered most of these systems in different combinations to assess the impact on performance, and driveability. We took the best combination of those changes and combined them with further tuning to improve the overall performance and driveability under all driving conditions. The overall affect was so dramatic we felt that all customers would benefit more if the changes were user selectable rather than forced.
In todays vehicles, the onboard computer controls maximum engine rpm. The stock computer is programmed to shut down the engine when it reaches its redline. But if you have modified your vehicle to increase its high-speed performance, more rpm means more power. When you shift gears with the stock rpm limit, the engine falls back to below the peak of its horsepower curve. When you extend the engines rpm range with the Max Energy Power Programmer, your engine has more power available after gear changes. By adjusting the maximum rpm to keep the engine in the sweet spot of its power curve, you can increase the average horsepower that accelerates the vehicle.
If you get a check engine light or service needed message, the Max Energy will allow you to read the code and gives you the ability to clear the code and turn the check engine light off. You can then make the necessary repairs to prevent the light from coming back on.
Hypertechs Max Energy downloads and saves the stock tuning program, then uploads your customized Power Tuning program. Before taking your vehicle into a dealership for service, always return the vehicles computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Max Energy Power Programming as before. The Max Energy can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friends vehicle, simply return your vehicle to the stock tuning program and you may then use the programmer on another vehicle that is covered in the same part number.
The Max Energy Power Programmer comes with a USB cable and a CD containing software to enable quick updates over the internet. If your vehicle has a new calibration not available when your Max Energy Power Programmer was manufactured, it is possible that you will see a Cal not found message on the Max Energy screen. If this occurs, you can simply update your Max Energy with the correct new calibration via the internet. Simply connect the Max Energy (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the CD which also contains an installation video and a printable version of the instruction manual.
NOTE: Does not support STI Models
Engine Idle RPM -100 to 200 RPM in 50 RPM increments
Cold Air Intake Tuning AEM with insert, AEM without insert, Injen Cold Air, K&N Typhoon
Top Speed Limiter 25 - 75 MPH in 5 MPH increments, 81 to 255 MPH to match speed rated tires
Rev Limit -500 to RPM Above or Below Stock Value
Cooling Fans Stock, 160 degrees F, 180 degrees F, 195 degrees F
Return Back To Stock
DTCs Read and Clear
Subaru WRX 2009-2011