Vortech Ford Mustang Bullitt 4.6L 3V (08) V-Power V-3 SI Complete Supercharger System- w/Charge Cooler
Product Code: VT010
£9,414.85
£7,845.71
- Usually Ships in 10-20 Working Days (Special Order)
- 4 months at 0% interest with PayPal (orders £99+)
deposit will be taken after acceptance by omnicapital finance
Deposit amount must be greater than or equal to .
Product Details
For the enthusiast that knows the standard street system just isn't enough, the Vortech V-Power system is the answer. More boost and a 50% larger air-to-water charge cooler mean that it is ready to reach whatever your performance goals are with your 4.6L 3V Mustang.
Complete Systems - Included Components and Features
- V-3 Si Supercharger - 11 PSI at redline
- 3.60" drive pulley
- Maintains the factory automatic drive belt tensioner.
- Includes OEM quality A/C pulley, power steering pulley, alternator pulley, idlers and crank damper pulley
- Supplied Diablosport In-Tune programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel. Other benefits include:
- Live data monitoring and diagnostics
- Logging capability
- Reading and resetting DTC’s
- Fuel system upgrade includes:
- High flow 60 lb/hr replacement fuel injectors
- 255 lph "in-tank" fuel pump with harness. Used in conjunction with the OEM in-tank pump to provide a dual-pump configuration.
- Air inlet assembly includes:
- High-flow roto-molded ducts
- Silicone sleeves with stainless steel clamps
- 98 mm MAF meter housing and air filter with heat shield
- Diablosport MAF interface adapter for extended meter range
- Includes replacement engine coolant pipes and hose assemblies
- Billet aluminum supercharger mounting bracket assembly includes idlers, drive belt and all hardware
- Oversized charge cooler assembly includes:
- Special oversized charge cooler provides a 50% increase in flow area for higher flow with reduced pressure loss.
- Large capacity, dual pass water cooler. Dual pass design and increased volume allows for increased heat exchange and improved performance during extended heavy throttle operation.
- Molded silicone discharge elbow, Vortech race compressor bypass valve, silicone sleeves and stainless steel clamps
- Charge cooler surge tank with hoses, clamps and plumbing
- High-flow Bosch water circulation pump for closed loop cooling
Installation
Installation time is rated at approximately 12 hours
Warranty Information:
1-Year Supercharger Limited Warranty
Included with all superchargers except race/heavy-duty models.
3-Year Supercharger Limited Warranty
Available with V-3 superchargers (if purchased as part of a complete street-legal system) for an additional $50.00. Note: Tuner kits are only eligible for a 1-Year Warranty.
Brand | Vortech |
---|
Write Your Own Review