Action Clutch Subaru WRX 2.0L (FA20DIT) Turbo AWD (15-18) Stage 5 Clutch Kit (2MS)

Action Clutch's Stage 5 (2MS) Clutch Kit allows for maximum performance of mid ranged powered vehicles. Our heavy-duty pressure plate is designed with a dual clamp load diaphragm and reinforced drive straps, creating an extremely durable system that you can rely on. This MIBA Sprung Ceramic kit features a MIBA Ceramic (available in a 4 or 6 puck) disc. With lightning-fast engagement and minimal clutch chatter after proper break-in, this clutch kit is ideal for harnessing all the power and performance you need out of your vehicle without compromising on reliability or longevity.

At Action Clutch, safety is our top priority. We understand how catastrophic engine or transmission damage can be caused by springs popping out which is why we use our patented, fully enclosed spring retainers to keep your investment protected at all times. Every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.

RACE APPLICATIONS / HEAVY TRACK USE / LIGHT STREET USE

Torque Holding Capacity: 628 ft/lbs

Midway through the 2018 model year, Subaru upgraded the WRX clutch from 230mm to 240mm to improve durability. Because the sizes and bolt patterns differ, you must match the kit to your car's production date using the VIN.

Check the last seven digits of your VIN to determine fitment:

If your VIN is lower than J*806877:
Your car has the original 230mm factory setup.
This clutch kit is compatible with your OEM flywheel. No additional parts are needed for installation.
If your VIN is J*806877 or higher:
Your car has the newer 240mm factory setup.
This kit is not compatible with your factory flywheel.
To use this kit, you must also install the AC105FW flywheel to convert the system back to the 230mm size.
What’s Included
Sprung MIBA Ceramic 6 Puck Disc
Dual Clamp Load HD Pressure Plate
Pilot Bearing / Bushing (when applicable)
Clutch Alignment Tool
Conventional Release Bearing

Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

Disclaimers
Ceramic based clutch discs intend to increase the holding capacity and durability of the clutch as opposed to an increased life expectancy. Using a ceramic based material for easy street driving may contribute to premature wear of the clutch kit due to the harsher engagement and because of the higher tendency to slip the clutch during street driving.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque