Genuine Nismo Nissan Skyline R32 inc. GT-R, R33 & R34 (89-02) Big Operating Clutch Slave Cylinder - Push type

This Genuine Nismo Big Operating Clutch Slave Cylinder allows for a smoother and lighter clutch movement. 

It is perfect for when using Nismo Race Clutch set ups

OEM : 3/4 inch (19.055mm)
NISMO : 13/16 inch (20.54mm)

 Copper seal washer required (Genuine Nissan part 46237-A4600)
・ Because the cylinder stroke volume is decreased when using the big operating cylinder, adjust the stroke as needed:
- 1. Before removing the standard operating cylinder, ensure that air does not enter by clamping the hose securely with a hose clamp.
- 2. Fill the big operating cylinder to be installed with brake fluid, and connect it to the hose after bleeding air from it.
- 3. Even after carefully completing steps 1 and 2, some air may be present. Air in the hose will change the pedal stroke and clutch feeling. It is difficult to remove air from wide diameter hose and pipes such as the U pipe, so be sure to eliminate air completely.
- 4. Vacuum pressure is the easiest way to accomplish step 3

(use the U-pipe eliminator adaptor which comes with the Nismo Clutch Hose).

Fits
SKYLINE ECR33/ENR33 EB25DE(T) Push Type
SKYLINE HNR32 RB20DET Push Type
SKYLINE GT-R BNR32 RB26DETT - 1993/02 Push Type
SKYLINE ENR34 RB25DE Push Type

Please note

This is a special order part from Japan, we aim to despatch from our UK Warehouse within 2-3 weeks but sometimes authentic JDM products can be delayed. Our promise to you is we will ship out as soon as physically possible but please have patience when ordering this type of product. If the item is required urgently then please get in touch prior to ordering. If you need an item and can’t see it listed on our site please get in touch and we can help. Please note we cannot accept returns or cancellations on this item unless it’s a stocked item.