SPC Performance BMW 1-Series, 2-Series & 3-Series (06-08) Rear Adjustable Camber Arm - Pair

Factory camber adjustment on the rear of the BMW 1 & 3 Series is limited and often not enough. Use SPC's rear camber arm to get an additional ±3° of camber on the E90, E91, E92, & E93 as well as the E82 & E88 models. Simply replace the OE link with SPC's adjustable link and adjust camber to maximize tire wear, get ready for the track, or optimize handling the way you drive your car. Once camber is where you want it, set toe with the OE cam and you are good to go. This arm is equipped with SPC's upgradedxAxis ball joint bushing and an OE style bonded rubber bushing to maintain factory standards for noise, vibration, and harshness. The arms are sold per side, get two kits if you need to adjust both sides of the car.

Turnbuckle adjusters for easy reliable adjustment

Rubber bonded bushing on one end and xAxis bushing on the other for increased articulation

High strength steel construction

Install one per wheel

Adjusts rear camber plus or minus 3.0 degrees

Fits
B
MW: 1 Series M 2011 - 2011
B
MW: 118i 2012 - 2013
B
MW: 120i 2008 - 2012
B
MW: 125i 2008 - 2013
B
MW: 128i 2008 - 2013
B
MW: 130i 2008 - 2010
B
MW: 135i 2008 - 2013
B
MW: 135is 2013 - 2013
B
MW: 320i 2012 - 2013
B
MW: 320i xDrive 2013 - 2013
B
MW: 323i 2006 - 2011
B
MW: 325i 2006 - 2013
B
MW: 325xi 2006 - 2006
B
MW: 328i 2007 - 2013
B
MW: 328i xDrive 2009 - 2013
B
MW: 328xi 2007 - 2008
B
MW: 330i 2006 - 2007
B
MW: 330xi 2006 - 2006
B
MW: 335d 2009 - 2011
B
MW: 335i 2007 - 2013
B
MW: 335i xDrive 2009 - 2013
B
MW: 335is 2011 - 2013
B
MW: 335xi 2007 - 2008
B
MW: ActiveHybrid 3 2013 - 2013
B
MW: M3 2008 - 2013