Z1 Motorsports Nissan 350Z (03-06) / Infiniti G35 (03-06) VQ35DE Knock Sensor Service Kit

Tarmac Sportz have partnered up with Z1 Motorsports to be the UKs approved distributor and fitter for all of their products.

Benefits of Buying Z1 products from Tarmac Sportz

• Assurance of authenticity.
• Access to manufacturer warranties.
• Reliable customer support.
• Peace of mind.
• Tried and tested products.
• Exclusive offers and pricing.

Z1 VQ35DE Knock Sensor Service Kit includes everything you need in order to completely service your knock sensors. When replacing your knock sensors you will have to remove your upper and lower manifold in order to change / service your knock sensors. The gaskets that are between the lower manifold and the cylinder heads must be replaced once the lower manifold has been removed.

This is the Knock Sensor Sub Harness found on all Nissan 350Z and Infiniti G35 models equipped with the VQ35DE Engine. When this harness fails you will see a Check Engine Light with the code P0327.

P0327 Codes are caused by either a low output voltage seen by the ECU from the knock sensor pointing to a faulty sensor or a short or open knock sensor circuit.
While most often this code is indicative of a faulty knock sensor sub harness, sometimes the sensors do go bad you can elect to purchase both below and save.

NOTE: G35 models with a build production date before 06/03 MUST purchase a new style knock sensor with the harness. The original knock sensor on G35's built prior to 06/03 is different, and cannot be connected with this new style harness. The optional knock sensor below is a new-style type sensor and will allow you to use the newer style knock sensor sub harness sold here.

Includes:

• (1) - 350Z / G35 VQ35DE Knock Sensor Sub Harness
• (1) - OEM 350Z / G35 Knock Sensor VQ35DE
• (2) - OEM VQ Lower Intake Plenum to Cylinder Head Gasket

Fits:

• 2003-2006 Nissan 350Z
• 2003-2007 Infiniti G35 Coupe
• 2003-2006 Infiniti G35 Sedan
• 2003-2008 Infiniti FX35