Z1 Motorsports Nissan 370Z (09-20) / Infiniti G37 (08-13) Track Big Brake Kit (Front)

Z1 Motorsports Nissan 370Z (09-20) / Infiniti G37 (08-13) Track Big Brake Kit (Front)

Z1 Motorsports Nissan 370Z (09-20) / Infiniti G37 (08-13) & Q60 (14-15) Forged Street Big Brake Upgrade (Front & Rear)

Z1 Motorsports Nissan 370Z (09-20) / Infiniti G37 (08-13) & Q60 (14-15) Forged Street Big Brake Upgrade (Front & Rear)

Z1 Motorsports Nissan 370Z (09-20) / Infiniti G37 (08-13) Cold Air Intake Kit

Product Code: Z1-370Z-INTAKE-KIT

£624.00 £520.00
  • Usually Ships 1-2 Weeks
  • 4 months at 0% interest with PayPal (orders £99+)

Tarmac Sportz have partnered up with Z1 Motorsports to be the UKs approved distributor and fitter for all of their products.

Benefits of Buying Z1 products from Tarmac Sportz

  • Assurance of authenticity.
  • Access to manufacturer warranties.
  • Reliable customer support.
  • Peace of mind.
  • Tried and tested products.
  • Exclusive offers and pricing.

The Z1 Motorsports VQ37VHR Cold Air Intake for dual throttle body cars provides improved flow and a cooler denser air charge resulting in greater combustion efficiency and more power. Significant gains in power and response have been proven with this torture tested intake.  

Features

Constructed of a mandrel bent 6061 aluminum tubing, TIG welded, polished, and features an integrated MAF housing for greater airflow, weight reduction, streamlined aesthetics, and overall product performance. This kit was designed to allow customers to install this intake without the need for immediate tuning, although a dyno tune is recommended to get the most out of your VQ. The improved density and flow rates help invigorate the output and even sound of your VQ37VHR engine with a deeper growl in low RPMs and aggressive tone in higher RPMs.

Cold-Air Innovation

The new intake uses race-proven technology by including two specially designed large-media air filters with integrated velocity stacks for increased airflow. A velocity stack is designed to maximize and optimize airflow by allowing air to gently enter the intake piping through an unobstructed rounded taper (similar to a trumpet horn.) This results in less intake turbulence and increased air velocity, allowing your intake system to work at its maximum potential!  

Aesthetically Pleasing

While the primary focus in aftermarket intakes may be enhanced performance, our focus was to provide a product that performed tremendously while providing a show quality finish and appearance. Available in two finishes, black and polished aluminum with your choice in Red, Black, or Blue Silicone Couplers. The intake also features MAF bosses that have been relocated to the bottom side of the intake piping for a stealth like appearance.

Performance

While every cars result may differ depending on mods and tune, Z1 Motorsports was able to achieve an increased 16whp and and additional 12lb-ft of torque in house on a car previously equipped with just a Full Tomei Expreme Exhaust. No re-tune was performed to achieve these results! You can expect even greater results when re-tune is performed.

Upgraded Velocity Stacks

Z1 also offers an oversized velocity stack upgrade helping push the potential of these intakes EVEN FURTHER! This upgrade can be purchased HERE and adds larger filters and velocity stacks which allow for better airflow producing even more power gains than the intakes alone. This upgrade has produced 5+ RWHP consistently on several Z's with dyno tune. As you can see from the dyno graph below, this upgrade produces more horsepower and torque across the entire RPM range.

Intake Kit Includes;

  • (2) Aluminum Intake Hard Pipes
  • (2) Silicone Straight Reducer Hose
  • (2) Silicone Throttle Body to Hard Pipe Adapter
  • (2) Aluminum 90° Hose to Filter Adapter
  • (2) Z1 High Flow Velocity Stack Air Filters
  • (1) Z1 Silicone Side PCV Breather Hose Set 
  • (10) Intake Coupler Clamps
  • (1) Installation Instructions

***CUSTOM POWDER COATING IS NOW AVAILABLE***

You may now choose to add your choice of any powder-coated colors to your Z1 Intakes in the options below! Custom colors are available upon request. Please contact our sales department to check costs and lead times.

Mix and match couplers and powder coating to fully customize your intake system to match your ride.

Available in:

  • Wrinkle Red
  • Wrinkle Black

Please note: Since this is a custom option, some powder coating services may add delay on shipping your order. We do however, strive keep the most popular colors in stock. 

 

More Information
Brand Z1 Motorsports
Write Your Own Review
You're reviewing:Z1 Motorsports Nissan 370Z (09-20) / Infiniti G37 (08-13) Cold Air Intake Kit